Proudly Serving Northern California Including - Sacramento, Santa Rosa, Stockton & Nearby
Enter your Zip Code to see if we serve your area:
Professional Concrete Spalling Repair in Sacramento & San Francisco
What is concrete spalling?
We provide durable and cost-effective solutions to repair and prevent concrete spalling.
Concrete spalling, or concrete scaling, is when slabs start to flake, peel, or crumble on the surface. Spalling can weaken the overall structural integrity of the slab, lower the property's curb appeal, and cause injury as a falling hazard.
Our concrete spalling repair system
NorCal Foundation Support provides cutting-edge concrete repair and concrete sealing methods by SURTREAT® Solutions Inc. This is a tried and true system trusted by government agencies, construction companies, and property owners worldwide for over 30 years. It is scientifically proven to prevent corrosion and reinforce slabs. This restoration system chemically reacts with the cement phase of concrete to improve the slabs' properties, restoring and strengthening the structure and reducing permeability. The result is long-lasting slabs with lower maintenance costs!
Get a free estimate on spalling concrete repair to learn more. We serve California areas throughout Santa Rosa, Elk Grove, Stockton, Sacramento, San Francisco, and nearby.
How SURTREAT works
SURTREAT is a chemistry-based, practical solution to concrete spalling, corrosion, and deterioration on all kinds of slabs, including driveways, patios, steps, walkways, launch pads, bridges, and more! The system significantly increases compressive strength, lowers water permeability, and prevents additional decay by addressing the cause of concrete damage, not just the symptoms.
The SURTREAT system:
TPS II
This is a corrosion inhibitor we apply to the concrete surface. As a multi-phase, inorganic product, it restores and promotes alkali passivity in damaged areas near the rebar.
Expected performance & benefits:
- Promotes corrosion & contamination resistance
- Inhibits chloride migration into the concrete to prevent corrosion of embedded metals & structural weakening
- Restricts & prevents water from seeping into the concrete
- Inhibits corrosion through multiple layers of protection, including to the rebar
- Fast application, fast cleanup & fast results
- Water-based, environmentally friendly formula that is non-toxic & biodegradable
- Breathable finish that won't trap existing chlorides & contaminants
TSP XII
TPS XII is a surface-based solution to inhibit corrosion on hardened concrete, protecting reinforcing steel by creating a passivating film on top of embedded steel to alleviate the anodic and cathodic sides of the corrosion cell. It migrates as a vapor to deposit on the embedded steel, preventing rebar corrosion and extending the concrete's lifespan.
Expected performance & benefits:
- Forms a durable passivating film on the surface of the embedded steel, creating a barrier between the steel & the environment to prevent corrosion
- Migrates as a vapor to deposit, ensuring the protection of the entire surface of the steel, even in areas that are difficult to reach
- It prevents rebar corrosion & extends the concrete's lifespan
- TPS XII is a water-based, non-toxic & biodegradable formula, making it an environmentally friendly option
HydroGuard
Hydroguard is a heavy-duty, Portland cement-based concrete sealing and coating system used to protect slabs and is safe for the inside of drinking water tanks and cisterns. It eliminates dampness, resists mold and mildew, prevents flaking and chalking, and seals all pores and voids. Plus, unlike ready-mix concrete sealing solutions only meant for dry surfaces, Hydroguard works on wet and dry applications.
It withstands over 22 psi of hydrostatic pressure, equal to a 48-foot-high wall of water. Plus, it is breathable, so moisture does not get trapped behind the surface. It even reduces radon gas infiltration!
When to use Hydroguard concrete sealing:
- When sealing/protecting concrete block, cinder block, poured concrete, fieldstone, masonry, brick, or stucco
- When waterproofing interior & exterior surfaces, above or below grade
- When sealing drinking water concrete tanks & cisterns
- When eliminating dampness, mold/mildew & flaking/chalking on basement and garage walls
- When sealing retaining or sea walls to prevent water intrusion & erosion
- When waterproofing bird baths, fountains, fish ponds, planters & bare concrete swimming pools
- When protecting foundations above or below grade
- When sealing unventilated crawl spaces & cellars to prevent moisture buildup
- When waterproofing concrete silos & tornado shelters
- When reducing radon gas intrusion
Surcoat
Surcoat is a polymer-modified, Portland cement-based concrete coating to use surfaces for water resistance. It also includes a volatile corrosion inhibitor to prevent corrosion of the embedded reinforcement on new or existing structures. It is meant for cement-based substrates vertical or overhead. Not for use as a traffic membrane.
Expected performance & benefits:
- Outstanding protection against moisture
- Corrosion inhibitor component proven for up to 30 years
- Offers proven laboratory & site performance
- Applies to a variety of reinforced concrete surfaces
- Environmentally friendly
- Breathable & Extremely durable
- Available in gray & white
SurCoShield
SurCoShield uses a proprietary blend of chemical materials that penetrates concrete surfaces, restoring and enhancing the cement phase properties for durability and hardness. It also reinforces abrasion and impact resistance and prevents mold and mildew. It is an environmentally friendly, clear, colorless liquid that is safe to use and does not emit harmful fumes.
Expected performance & benefits:
- Keeps surfaces clean
- Penetrating, durable formula
- Will not discolor or degrade by UV light
- Creates a water-repellant surface
- Can be used on stone, brick, or cement-bonded surfaces, including building walls, roof tiles, pavers, sidewalks & pool decks
- Environmentally friendly, water-based formulation
Environmental benefits of SURTREAT
Since SURTREAT concrete repair restores and protects slabs, there is no need for frequent restoration, reducing carbon monoxide emissions and harmful silica. Our solutions also extend the lifespan of concrete, reducing the need for concrete replacement and removal and lowering your carbon footprint. Plus, many SURTREAT solutions are water-based and non-toxic, making them safe for our employees, your loved ones, and the environment!
Why choose SURTREAT?
Carbon fiber strips are often used to address the structural damage caused by concrete spalling. However, this method alone won't prevent future corrosion and damage. That's where SURTREAT comes in! SURTREAT concrete repair and sealing provides the long-lasting results you need by:
- Addressing the cause of damage: SURTREAT concrete repairs will address the cause of deterioration and prevent future problems by protecting the rebar from corroding.
- Quick, cost-effective application: SURTREAT solutions are easy to apply, using surface-based coatings and penetrating sealers that don't involve specialized equipment.
- Preventing corrosion & damage: SURTREAT prevents concrete spalling and damage from environmental factors and corrosive elements.
- Preserving structural integrity: SURTREAT is perfect in applications to prevent corrosion, like the outdoors, basement, or crawl space.
- Less maintenance: SURTREAT offers long-lasting protection with little maintenance since it penetrates the surface to provide ongoing benefits.
Get a free estimate on concrete spalling repair!
Ready to see how SURTREAT solutions can address concrete spalling and damage around your Northern California property? Get a free estimate on concrete repair and concrete sealing today! We serve California areas throughout San Francisco, Stockton, Santa Rosa, Sacramento, and nearby.
Looking for a price? Get a no cost, no obligation free estimate.
